• Air permeability tester for the automatic determination of the specific surface (grinding fineness / Blaine value) of powdered materials, especially for the permanent control of manufacturing characteristics in the daily laboratory work.   Key benefits for the user: ✓ 5.7" color display with touchscreen operation for intuitive and user-friendly operation ✓ Alternating operation with two measuring cells enables a higher test frequency ✓ Implication of the environmental temperature into the calculation of the specific surface ✓ Height adjustable optical sensors for the adaption of the cycle time to different types of material ✓ Calibration using reference materials feasible by the user ✓ Density, initial weight and porosity are freely selectable ✓ Integrated compartment for the storage of consumables and reference materials ✓ Any number of correction factors (K-factors) storable ✓ Runtime indication resolution: 0.1 seconds ✓ Calculation of the specific surface based on any number of single measurements on one powder bed ✓ Integrated data base for the storage of up to 300 test results including all test parameters ✓ Integrated data base for the storage of materials with different density and porosity ✓ Possibility to connect a printer for automatic raw data print out ✓ USB interface for easy and fast export of test results including all test parameters ✓ Possibility to connect a dial gauge for the automated compensation of compaction deviations ✓ Improved comparability of the test results by separately calibratable measuring cells (compensation of minimum volume differences of the measuring cells) ✓ Ability to change the correction factor subsequently for an extended result evaluation
  • Advantages Large operation range (variable diameters and measuring lengths)   ✓ High reproducibility ✓ Application and disassembling also during the test ✓ Conception for mobile tasks (transport box) Working Principle The double extension sensor with the desired measuring lenght is applied to the specimen. It is fixed by the springs. At this procedure the precise extension sensors are blocked at neutral position. After the adaption they will be delocked and a zero adjustment (ZERO potentiometer) will be performed. The compression test will be done; before rupture of the specimen the extensiometer should be removed. The removement can be performed even when sample is under load.    
  • Load frame in table-design for compressive strength tests on building materials of all kind, preferably for the quality control and efficient routine tests.
    • Accuracy:   Quality Class 1 / DIN 51220 / EN ISO 7500-1
    • Sizes:         200 kN / 300 kN / 400 kN / 600 kN / 1000 kN
      Key benefits for the user: ✓ Prepared for the connection with a ToniNORM Powerbox as standard ✓ Up to 300 kN maximum load equipped with high precision load cell on DMS basis as standard (optionally also available for higher loads) ✓ Combinable with up to 2 further load frames of the modular system ToniNORM ✓ Programmed test execution with control system ToniTROL ✓ High longitudinal and transverse stiffness due to four-column design For this load frame are various pressure plates, a large range of accessories and optional extensions available
  • Intuitive and workflow-based right from the start!

    testXpert III is the result of close cooperation with software users in the materials testing industry and the experience of over 35,000 successful testXpert installations. From the very start, testXpert III uses a workflow that is based on your lab processes to guide you step by step through your test. Get to know testXpert III and experience how easy it is to use.

    Testing software testXpert III - Intuitive & Workflow-Based

    Our testing software testXpert III offers an intuitive and workflow-based concept for all testing machines and instruments. The workflow reflects the work processes used in your lab and guides you through the various steps of a test, from preparing and running the test to analyzing results.

  • Microprocessor control system for the functions measuring, controlling and monitoring of building material testing machines.   Key benefits for the user:   ✓ Operation of up to three load frames ✓ Controls force, path and deformation ✓ Freely programmable test procedures ✓ User-friendly operation ✓ Future-proof by retrofit table software modules   The ToniTROL is equipped with various interfaces that allow the connection of different external devices, like e.g. calliper, scale, specimen measuring station and barcode reader. In combination with the bidirectional interface software ToniLINK parameters and measuring values can be transmitted to a PC for the further evaluation.
  • Digital measurement and control system for the functions measuring, controlling and monitoring of building material testing machines. The ToniTROL II is the further development of our tried and tested ToniTROL and provides therefore all functions that are proven in building material testing for decades. Due to the combination of the latest technical components and various software modules the ToniTROL II is state-of-the-art and provides a lot of new features and functions.   Key benefits for the user: ✓ Operation of up to 4 load frames ✓ Up to 99 freely programmable test procedures ✓ 5.7" color display ✓ Intuitive, user-friendly and self-explanatory set up and operation ✓ Ten selectable indications, e.g. force, strength, speed and further important parameters ✓ Switchable between SI (cm, kN, N/mm²...) and US units (inch, lbf, psi...) ✓ TCP/IP (Ethernet) interface for the PC or network connection ✓ USB interface for the export of measurement data via removable media (USB flash drive) ✓ Future-proof by retrofittable sofware modules ✓ Monitor connectivity via VGA connector ✓ Scale and caliper connectivity to record weight and dimensions of specimens ✓ Barcode-reader connectivity to record specimen identifications ✓ Printer connectivity for raw data printing
  • Load frame for standard-compliant tensile strength tests on metallic specimens, like e.g. construction steel resp. reinforcing steel.

    • Accuracy:  Quality Class 1 / EN ISO 7500-1 / DIN EN 10 002
    • Sizes:        100 kN / 200 kN / 400 kN / 600 kN / 1000 kN
     

    Key benefits for the user:

    ✓ Optionally convertible for compressive and flexural strength tests ✓ Prepared for the connection to a ToniNORM-Powerbox as standard ✓ Alternatively with mechanical or hydraulical grip heads available ✓ Extremely sturdy and durable construction ✓ Combinable with up to 2 further load frames in the modular system ToniNORM ✓ Easy programming and user-friendly operation using the control system ToniTROL ✓ Machine control and test evaluation by PC using the software testXpert

    For this load frame are various accessories and a large range of optional extensions available.

Go to Top