• Performance unit for the standard-compliant storage of specimens under water. This unit provides using the corresponding sample container a storage capacity for 216 prisms with the dimensions 40x40x160 mm or for 336 cubical specimens with an edge length of 50 mm (2 inch). The entire storage tank is made of stainless steel. An immersion thermostat allows the precise tempering of the water.   Advantages ✓ Compatible with the ToniSYSTEMLABORATORY ✓ Operation and handling ✓ High storage capacity by storage in six respectively seven levels ✓ Integrated thermostat with digital display for the actual value and the set value
  • The performance unit consists of a rigid steel frame construction and is equipped with three stainless steel basins for the standard-compliant storage of specimens in water. The specimens can be stored optionally in a vertical or a horizontal position. Each basin comes with an immersion thermostat that allows the accurate tempering of the water. The basins can be used individually because each basin is equipped with a separate inlet valve and an independent drain system. The unit provides a storage capacity for 240 prisms (40x40x160 mm) in horizontal position or for 630 prisms in vertical position. Alternatively up to 540 cubes with an edge length of 50 mm (2 inch) can be stored.   Advantages ✓ Compatible with the ToniSYSTEMLABORATORY ✓ Easy operation and handling ✓ High storage capacity at small footprint ✓ Integrated thermostat with digital display for the actual value and the set value ✓ Open and clear arrangement of the specimens
  • Performance unit for the storage of freshly compacted building material specimens at a relative humidity of at least 90%, preferably for the storage of triple moulds with freshly prepared prisms 40 x 40 x 160 mm. The unit provides storage space for 12 triple moulds in 6 sliding drawers. A fan distributes the air and the temperature inside the unit equally. The wet storage is designed as sturdy steel frame construction and is equipped with a working top made of stainless steel. Due to the separation of the storage tank and the working table a shock- and vibration-free storage of the specimens is guaranteed. By the available extension unit the storage capacity can be extended to 24 triple moulds.   Advantages ✓ Convenient storage of moulds next to the working area eliminates long transports ✓ Sliding drawers for easy insertion and removal of the moulds ✓ Undisturbed curing due to shock protected installation of the storage container
Go to Top