• Fully automatic test plant in compact design for standard-compliant compressive strength tests on building materials, preferably for efficient routine tests and quality control on:
    • Cylinders 150 x 300 mm or 160 x 320 mm according to EN 12390-3
    • Cylinders 150 x 300 mm or 160 x 320 mm according to EN 12390-4 (strain cylinder test)
    • Cubes with 100 mm, 150 mm or 200 mm edge length according to EN 12390-3
    • Cubes with 100 mm, 150 mm or 200 mm edge length according to EN 12390-4 (strain cylinder test)
     
    • Accuracy:           Quality Class 1 / DIN 51220 / EN ISO 7500-1
    • Sizes:                  2000 kN / 3000 kN / 4000 kN
      Key benefits for the user: ✓ Easy programming and user-friendly operation ✓ Designed as space-saving compact unit ✓ Young´s modulus measurement possible ✓ Microprocessor and servo-hydraulic control (closed loop) ✓ Control by PC with software testXpert ✓ Future-proof by various software extensions ✓ High torsional stiffness (max. 1 mm expansion at full load) ✓ Result evaluation by PC with software testXpert For the ToniPACT II are various pressure plates, a large range of accessories and optional extensions available.
  • Load frame in compact design for the standard-compliant compressive strength tests on building materials, preferably for efficient routine tests and quality control on: Concrete cylinders 150 x 300 mm or 160 x 320 mm according to EN 12390-3 Concrete cubes with 100 mm, 150 mm or 200 mm edge length according to EN 12390-3
    • Accuracy:   Quality Class 1 / DIN 51220 / EN ISO 7500-1 / EN 12390-4
    • Sizes:          2000 kN / 3000 kN / 4000 kN
      Key benefits for the user: ✓  Design according to EN 12390-4 available (strain cylinder) ✓  Prepared for the connection with a ToniNORM-Powerbox as standard ✓  Combinable with up to 2 load frames of the modular system ToniNORM ✓  Measurement of the "modulus of elasticity" (Young´s modulus) possible ✓  Automatic test procedure with control system ToniTROL ✓  High torsional stiffness; expanson of max. 1.0 mm at full load For this load frame are various pressure plates, a large range of accessories and optional extensions available.
  • Load frame in table-design for compressive strength tests on building materials of all kind, preferably for the quality control and efficient routine tests.
    • Accuracy:   Quality Class 1 / DIN 51220 / EN ISO 7500-1
    • Sizes:         200 kN / 300 kN / 400 kN / 600 kN / 1000 kN
      Key benefits for the user: ✓ Prepared for the connection with a ToniNORM Powerbox as standard ✓ Up to 300 kN maximum load equipped with high precision load cell on DMS basis as standard (optionally also available for higher loads) ✓ Combinable with up to 2 further load frames of the modular system ToniNORM ✓ Programmed test execution with control system ToniTROL ✓ High longitudinal and transverse stiffness due to four-column design For this load frame are various pressure plates, a large range of accessories and optional extensions available
  • Load frame with large testing area dimensions for standard-compliant compressive strength tests on building material specimens of all kind, e.g. concrete-, brick- and natural stone specimens. This load frame is made for extremely challenging test requirements in the quality control, the development and the research.
    • Accuracy:   Quality Class 1 / DIN 51220 / EN ISO 7500-1
    • Sizes:          5000 kN / 6000 kN / 8000 kN / 10000 kN
      Key benefits for the user: ✓ Prepared for the connection with a ToniNORM-Powerbox as standard ✓ Combinable with up to 2 further load frames in the modular system ToniNORM ✓ Automatic test procedure with control system ToniTROL ✓ High torsional stiffness; expansion of max. 0.9 mm at full load ✓ Suitable for testing specimens with large dimensions For this load frame are various pressure plates, a large range of accessories and optional extensions available.
Go to Top