Load Frame for Compressive Strength Tests in Table Design – Model 2020

Load frame in table-design for compressive strength tests on building materials of all kind, preferably for the quality control
and efficient routine tests.

  • Accuracy:   Quality Class 1 / DIN 51220 / EN ISO 7500-1
  • Sizes:         200 kN / 300 kN / 400 kN / 600 kN / 1000 kN

 

Key benefits for the user:

✓ Prepared for the connection with a ToniNORM Powerbox as standard
✓ Up to 300 kN maximum load equipped with high precision load cell on DMS basis as standard (optionally also available for higher loads)
✓ Combinable with up to 2 further load frames of the modular system ToniNORM
✓ Programmed test execution with control system ToniTROL
✓ High longitudinal and transverse stiffness due to four-column design

For this load frame are various pressure plates, a large range of accessories and optional extensions available

Categories: , , , , , , , ,

Description

Design

Rigid four-column load frame with high longitudinal and lateral stiffness.

Base mounted plunger drive. Piston hardened, piston and cylinder micro finished. Piston equipped with protection cover and stroke indication.

Pressure plates hardened and ground (HRC ≥ 58).

Upper pressure plate tiltable up to 3° in spherical seat.

Lower pressure plate equipped with cross hairs.

Load frame integrated in a system working table, dimensions and design matching with the ToniNORM Power-box, model 2010. Rigid frame made of steel sections cased by coated steel panels. Solid table top covered with stainless steel.

 

Operating Principle

The load frame is connected to the ToniNORM Powerbox and to the ToniTROL control system. Tests are prepared, performed and evaluated via software. Controlled by a servo valve in closed loop control.

Load measuring by precision load cell on DMS basis for load frames up to 300 kN load as standard. Load frames with higher load capacity are equipped with an oil pressure transducer. Load frames with a higher load capacity than 300 kN are optionally available with a load cell on DMS basis.

 

 

Additional information

Maximum test load

2020.0200 = 200 kN 2020.0300 = 300 kN 2020.0400 = 400 kN 2020.0600 = 600 kN 2020.1000 = 1000 kN
Distance between columns

– Front / back 2020.0200 = 250 mm 2020.0300 = 250 mm 2020.0400 = 320 mm 2020.0600 = 320 mm 2020.1000 = 320 mm – Left / right 2020.0200 = 150 mm 2020.0300 = 150 mm 2020.0400 = 200 mm 2020.0600 = 200 mm 2020.1000 = 200 mm
Hardness

≥ 58 HRC
Diameter

2020.0200 = 180 mm 2020.0300 = 180 mm 2020.0400 = 220 mm 2020.0600 = 220 mm 2020.1000 = 220 mm
Pressure plate distance (standard)

225 mm
Pressure plate distance (option 1)

340 mm
Pressure plate distance (option 2)

540 mm
Piston stroke

100 mm
Working pressure

2020.0200 = 176 bar 2020.0300 = 265 bar 2020.0400 = 176 bar 2020.0600 = 265 bar 2020.1000 = 176 bar
Width

2020.0200 = 600 mm 2020.0300 = 600 mm 2020.0400 = 600 mm 2020.0600 = 600 mm 2020.1000 = 700 mm
Depth

2020.0200 = 500 mm 2020.0300 = 550 mm 2020.0400 = 550 mm 2020.0600 = 550 mm 2020.1000 = 550 mm
Height

900 mm
Net weight

2020.0200 = 500 kg 2020.0300 = 550 kg 2020.0400 = 650 kg 2020.0600 = 650 kg 2020.1000 = 850 kg

Related products

Acmel Labo SAS

5 rue Léon Appert

91280, Saint Pierre du Perray (France)

Tel: +33 (0) 1 60 759561

Fax: +33 (0) 1 64 932893

We also build trust

Blog

About us

Legal notice

Privacy Policy

Stay connected

Go to Top