Performance Unit „Water Storage“ – Model 5549

Description

Design

The performance unit „water storage“ consists of a sturdy steel frame construction, that is made of lacquered stainless steel.

The unit is equipped with three stainless steel basins for the storage of the specimens. Each basin comes with a drain, a standpipe valve and an inlet valve.

Three integrated immersion thermostats serve for tempering of the water.

 

Operating Principle

The basins can be filled with water independently of each other up to the overflow level of the standpipe valve.

The specimens are stored on plastic grills inside the basins. The models that are designed for the vertically storage of prisms are additionally equipped with grids in that the specimens are put into.

Immersion thermostats heat up the water to the desired set temperature (≤ ambient temperature) and maintain the water temperature constant under recirculation. If required different temperatures can be choosen for each basin.

For the draining and cleaning of the basins the standpipe valve is removed. The water runs off through the integrated pipe system.

 

Available Models

Water storage 1200 mm wide, model 5549.012: for the storage of specimens on plastic grills; including three immersion thermostats

Water storage 1200 mm wide, model 5549.012.2 : for the storage of prisms 40 x 40 x 160 mm in a vertically position on plastic grills; including three immersion thermostats and three grids

Water storage 1500 mm wide, model 5549.015 : for the storage of specimens on plastic grills; including three immersion thermostats

Water storage 1500 mm wide, model 5549.015.2 : for the storage of prisms 40 x 40 x 160 mm in a vertically position on plastic grills; including three immersion thermostats and three grids