Vibrating Table ToniVIB – Model 5533

Performance unit for the standard-compliant compaction of cement mortar and other binding materials according to EN 196, DIN 1164, ASTM C109 and other standards.


Key benefits for the user:


✓ Large 3.5″ TFT color display in ideal eye level
✓ Parameter setting via touch screen
✓ Comfortable one-button operation START/STOP
✓ Variable pre-selection of the vibration amplitude in steps of 0.05 mm
✓ Adjustable vibration period of 1-655 seconds
✓ Tare function of the vibration amplitude display
✓ Variable power input frequency 48-63 Hz at 110/240 V
✓ Ergonomic working and operating height
✓ Normalized 50 Hz vibration frequency, regardless of the input frequency
✓ High linearity and display accuracy of the vibration amplitude: 0.05-1.00 mm
✓ Acceleration and frequency display in the service menu
✓ Integrated, password-protected calibration function
✓ Language switch (German / English / French)
✓ Vibration in a closed-loop to guarantee the selected amplitude
✓ Operating hours counter
✓ Can be integrated into the ToniSYSTEMLABORATORY
✓ Designed acc. to the machinery directive 2006/42/EC, as well as UL/CSA requirements
✓ Modification of the clamping device for moulds of other manufacturers is possible.




A vibrating plate is integrated into the table top onto standardized anti -vibration mounts. It is driven by a magneto actuator at a rate of 3000 cycles per minute. The controls and the TFT display with touchscreen operation are arranged in ideal eye level and operation position. Tabletop and vibrating plate coating, made of stainless steel, are part of the standard design. The mould clamping is realized by quick clamping elements.


Working Principle

Prior to compaction the vibration amplitude has to be set with mounted empty mould. The vibration time is freely selectable up to 655 seconds by a digital timer. The set language, amplitude and compacting time are stored permanent.

During the compacting the actual and the set value for the vibration time as well as for the vibration amplitude are displayed.

The daily operation is done by START / STOP.

The moulds are filled during operation of the vibrating table. The amplitude alteration caused by the increasing weight of the material is compensated by the controller and held constant according to the set value. After the expiration of the selected time the compacting process stops automatically.

Additional information

Vibration frequency

50 ± 0.3 Hz

Vibration amplitude

0.05 – 1.00 mm

Display accuracy

±0.05 at 0.75 mm

Vibration time

1 – 655 sec

Power supply

Voltage = 110 / 230 V Frequency = 48 – 63 Hz Power consumption = 1

Dimensions of the vibrating plate

Width x Depth = 560 x 350 mm

Dimensions of the vibrating table

Width x depth x height = 600 x 775 x 1400 mm Working height = 900 mm


Gros / Net = 185 / 155