Nous couvrons un large éventail d’industries

Les matériaux de construction modernes se composent de diverses matières premières, y compris des minéraux naturels et artificiels, des matières plastiques, du bois ou des métaux, et sont disponibles sous des formes de produits extrêmement variées : poudres, matériaux en vrac, films et feuilles, panneaux, briques et moulures, ou composants préfabriqués tels que panneaux muraux, poutres, escaliers, etc. Ils sont utilisés pour la réalisation de fondations, de murs et de plafonds, pour la protection et l’amélioration visuelle de surfaces, pour l’étanchéité de joints et de surfaces ou pour l’isolation thermique. Ils sont employés dans des bâtiments de taille et de fonction très disparates et pour des infrastructures telles que les routes, les ponts et les barrages.

Les différentes propriétés des matériaux de construction ainsi que les échantillons, les composants et les structures fabriqués à partir de ces matériaux exigent des machines d’essai avec des profils de performance adaptés.

La priorité, les machines et instruments d’essais sont conçus pour, est le ciment, le matériau de base de la plupart des liants. Cela comprend également tous les types de mortier (mortier de gypse, mortier de chaux et mortier de ciment), y compris le mortier prémélangé, le mortier sec et les adhésifs à base minérale ou partiellement minérale.

Le module d’élasticité (module de Young), qui implique par exemple l’influence des fibres minérales ou synthétiques sur la résistance à la compression et à la flexion, peut être déterminé par nos machines automatiques d’essais de compression et de flexion combinées avec les dispositifs de mesure supplémentaires correspondants.

Cement

Cement

Find out about our comprehensive products range.    you so you can test different properties of one of the most important binders in the world.

Products
Mortar

Mortar

Similar as with concrete, cement also serves as a binding agent for the production of various types of mortar

Products
Gypsum

Gypsum

The glass testing is usually realized as destructive flexure strength test that requires typically not very large test forces.

Products
Adhesives

Adhesives

The wood testing is usually characterized by relatively low forces, but also by long testing paths.

Products
Admixture/Additives

Admixture/Additives

All types of hydraulic and nonhydraulic binders and mixtures are classified under this term. The priority, the testing machines and instruments are designed for, is cement, the basic material of the most binders.

Products
Adhesives

Adhesives

The strength of cement is normally between 20 N/mm² and 50 N/mm² but the strength of high-performance concrete and reinforced concrete can amount 200N/mm² and more.

Products
Sealants

Sealants

The glass testing is usually realized as destructive flexure strength test that requires typically not very large test forces.

Products
Protection/Repair

Protection/Repair

The wood testing is usually characterized by relatively low forces, but also by long testing paths.

Products
Standard/Testing

Standard/Testing

All types of hydraulic and nonhydraulic binders and mixtures are classified under this term. The priority, the testing machines and instruments are designed for, is cement, the basic material of the most binders.

Products
Precast

Precast

The strength of cement is normally between 20 N/mm² and 50 N/mm² but the strength of high-performance concrete and reinforced concrete can amount 200N/mm² and more.

Products
Bricks/Tiles/Plastas

Bricks/Tiles/Plastas

The glass testing is usually realized as destructive flexure strength test that requires typically not very large test forces.

Products
Aggregates

Aggregates

The wood testing is usually characterized by relatively low forces, but also by long testing paths.

Products

Non-metallic ceramic materials and composites whose softening points are above 1,500 ° C are defined as refractory material.

Refractory materials, which are separated into shaped (e.g. stones, blocks, slabs) and unshaped (e.g. cement, mortar, concrete) materials, are mainly used in high temperature industrial processes.

Discover more
Automotive

Automotive

All types of hydraulic and nonhydraulic binders and mixtures are classified under this term. The priority, the testing machines and instruments are designed for, is cement, the basic material of the most binders.

Products
Glass/Wood

Glass/Wood

The strength of cement is normally between 20 N/mm² and 50 N/mm² but the strength of high-performance concrete and reinforced concrete can amount 200N/mm² and more.

Products
Plastic

Plastic

The glass testing is usually realized as destructive flexure strength test that requires typically not very large test forces.

Products
Special Application

Special Application

The wood testing is usually characterized by relatively low forces, but also by long testing paths.

Products
Steel

Steel

All types of hydraulic and nonhydraulic binders and mixtures are classified under this term. The priority, the testing machines and instruments are designed for, is cement, the basic material of the most binders.

Products
Aluminium

Aluminium

The strength of cement is normally between 20 N/mm² and 50 N/mm² but the strength of high-performance concrete and reinforced concrete can amount 200N/mm² and more.